Introducing the KFI Winch Split Cable Hook Stopper, a compact upgrade designed for ATV and UTV winches. It sits between the two outside rollers of the fairlead, reducing hook wear, minimizing trail clatter, and helping protect your winch during tough pulls. Lightweight and easy to install, this accessory keeps your line aligned and your setup looking clean on rough terrain.

Specifications

• Weight: 114 g (4 oz)
• Width: 2 5/8 inches
• Thickness: 1 3/4 inches
• Fits between the two outside rollers on ATV/UTV winch fairlead
• Compatible with synthetic rope and/or slot fairlead
• Installation (gloves recommended):
  1. Freedspool the winch and pull out approximately 2 feet of cable
  2. Remove the hairpin and release the clevis pin from the winch hook
  3. Remove the four bolts securing the two halves of the Split Cable Hook Stopper; place the cable between the halves, then reinsert and tighten the bolts
  4. Re-attach the hook to the cable end
  5. To stow, engage the clutch and reel the cable back onto the winch until the hook sits snug against the stopper and fairlead
  6. Position the stopper at about 3/4 of the total line distance toward the hook while winching