Rugged, aftermarket 12V DC winch contactor designed to replace worn or failing contactors across a wide range of ATV/UTV winches. It delivers reliable engagement to power the winch motor while protecting the electrical system from voltage spikes and excessive wear. Constructed with copper alloy contacts and a weather-sealed housing to resist mud, rain, and vibration. Requires a four-wire switch setup for proper operation.

What's Included

This replacement contactor is provided as a standalone unit suitable for compatible winch systems.

• 1 x 12V Winch Contactor

*Not included: mounting hardware, wiring harness, and related components may vary by model.*

Specifications

Installation Notes

• Disconnect the battery before starting any wiring work to prevent arcing or shorts.
• Verify four-wire wiring: two wires to the contactor, one to keyed power, one to ground to ensure proper operation.
• Inspect all wiring harnesses for damage; replace damaged wires and protect with appropriate looms or heat shrink tubing.
• Route wires away from moving parts, heat sources, and sharp edges; secure with zip ties and clips to prevent chafing.
• Use proper fuse protection and confirm the fuse rating matches the winch and controller requirements.
• After installation, test the setup with the ignition on in a controlled environment before loading the winch under real conditions.